The hydraulic Quick hitch joint requires modification of the excavator pipeline and hydraulic system to meet the needs of automatic replacement of the working device (convenient, practical, and cost-effective), and is used to frequently switch various accessories of the excavator (digging bucket, scarifier, crushing hammer, and grabber).
The hydraulic quick hitch joint requires modification of the excavator pipeline and hydraulic system to meet the needs of automatic replacement of the working device (convenient, practical, and cost-effective), and is used to frequently switch various accessories of the excavator (digging bucket, scarifier, crushing hammer, and grabber). Hydraulic quick change can be easily replaced with various accessories, which is quite convenient and fast for excavator operators. Compared to mechanical quick change, hydraulic quick change is safer, and there is no need to twist the lead screw when getting off the car. Slowly, mechanical quick hitch is completely replaced.
Hydraulic quick hitch replacement principle
1. Use a safety device with a hydraulic control one-way valve to ensure safety.
2. The excavator configuration components can be replaced without modification or disassembly of the pin shaft, so installation is fast and can greatly improve work efficiency.
3. There is no need to manually smash the bucket pin between the crushing hammer and the excavation bucket. Gently moving the switch for ten seconds can complete the exchange between the excavation bucket and the crushing hammer, which is time-saving, labor-saving, and simple and convenient.
4. Mainly used in workplaces that require frequent replacement of the front-end working device of excavators, it is recommended to avoid installing a device for long-term use.
Hydraulic quick hitch structure diagram
In recent years, EP small excavators have received much attention in the international market, and the number of exported small excavators is also increasing year by year. As a leading enterprise in small excavators in China, EP small excavators are very popular in foreign markets, and the following models are very popular.
They are usually used in urban infrastructure, residential area renovation, pipe laying and gardening projects, especially in places with limited space.
Regularly check the connection and tightening of each component, and replace seriously worn components in a timely manner. When cleaning accessories, use special detergent and soft cloth to wipe them, and avoid using acid and alkali corrosive substances. Lubricating parts should be regularly filled with lubricating oil to maintain good lubrication.
Mini excavator is an ideal excavator to meet the daily work needs of workers. Its fuselage is only 72cm wide, with a foldable flip bar, which can pass through very narrow places and even reach the places that most people can reach.
First of all, it depends on the materials that need to be processed. If you need to dig out sand, gravel, etc., you can choose a bucket or breaker; if you need to transport wood, steel, etc., you can choose wood clamps or hooks; if you need to compact the ground Or piling, you can choose a tamping attachment or an auger.
With the rapid development of urban construction and infrastructure, mini excavators have become
read more
With the arrival of Thanksgiving, E.P Machinery has received the latest additional orders from lo
read more
the crawler mini excavator 1.8 ton is equipped with the Kubota D902 engine, a three-cylinder wa
read more
